Product Center
TFS-200 Pneumatic Flat Press Hot Stamping Machine
The TFS-200 Pneumatic Flat Press Hot Stamping Machine utilizes a flat press hot stamping process, achieving precise and stable pressure application through pneumatic drive. The equipment features an intuitive and user-friendly operation interface. Paired with a dedicated X- & Y-direction adjustable worktable, it allows flexible adjustment of ±15 mm displacement and ±5-degree angle, meeting the hot stamping requirements for complex workpieces such as flat, slanted, and curved surfaces.
Detailed Introduction
TFS-200 Pneumatic Flat Press Hot Stamping Machine | Multi-Curve Surface Stamping | Intelligent Temperature Control | Eco-Friendly and Efficient Hot Stamping Equipment
Product Features:
• This equipment employs a pneumatic drive system, equipped with an adjustable worktable and a dedicated clamping fixture system, enabling precise hot stamping on flat, slanted, curved, and irregular surface workpieces to meet diverse production needs.
• Built-in PID intelligent temperature controller with a temperature control accuracy of ±1°C, supports wide-range adjustment from room temperature to 300°C, ensuring temperature suitability for stamping different materials.
• Utilizes a timer-controlled paper feed mechanism and automatic waste foil recovery device. The foil advances automatically after each stamping cycle, improving material utilization while ensuring each stamping uses a fresh foil surface.
• Centralized control panel integrates various parameter setting functions. Combined with a 3-inch opening adjustment handwheel and anti-pinch hand protection device, operation is simple, convenient, and safe.
• Complies with green production standards, maintaining a clean and pollution-free working environment.
• Standard working cycle can reach 400-600 times per hour, supports quick mold change and parameter presets.
• Supports a maximum hot stamping foil width of 200mm, with an effective stamping area of 200×150mm, meeting the decorative needs of most small and medium-sized workpieces.
• Total machine power is 3.6KW. It employs precise heating control and a standby energy-saving mode, effectively reducing operating costs.
• Main pneumatic components and electrical modules use standardized interfaces, facilitating easy maintenance and replacement, effectively reducing downtime.
• Equipped with mechanical anti-pinch hand device, electrical overload protection, and emergency stop system, comprehensively ensuring the safety of operators and the equipment.
• Overall machine dimensions are 1000×750×1900mm (L×W×H), achieving a maximum adjustable working height of 800mm within a limited footprint, adapting to different workshop layout requirements.
• Through precise coordination of temperature, pressure, and time, it can adapt to hot stamping needs on various materials such as paper, plastic, leather, wood, and some metal coatings.
TFS-200 Pneumatic Flat Press Hot Stamping Machine Specifications:
|
No. |
Component Name |
Specification |
|
1 |
Stamping Lift Cylinder |
SA80×100-30 |
|
2 |
Foil Holder End |
Ø25mm |
|
3 |
Lift Guide Rails |
Ø20 |
|
4 |
Waste Foil Recovery |
Ø25mm |
|
5 |
Stamping Hot Plate |
220×170mm |
|
6 |
Foil Feed Control |
15W |
|
7 |
Worktable |
380×280mm |
|
8 |
Opening Adjustment Handwheel |
3" |
|
9 |
Lift Bracket |
0～300mm |
Technical Parameters:
| Parameter | Specification |
| Machine Body Dimensions | L1000 × W750 × H1900mm |
| Total Power | 3.6KW |
| Stamping Method | Pneumatic |
| Heating Power | 3000W |
| Temperature Control | PID Control |
| Heating Temperature Range | Room Temp. ~ 300°C |
| Hot Plate Size | 220×170mm |
| Stamping Area | 200×150mm |
| Lift Cylinder | SA80×100-30 |
| Lift Stroke | 100-30mm |
| Max. Stamping Pressure | 350KG |
| Worktable Size | 380×280mm |
| Worktable Fine Adjustment | X-axis ±15mm, Y-axis ±15mm, Angle ±5 degrees |
| Working Height | 800mm ±25 (Center Height) |
| Paper Feed Mode | Timer-controlled |
| Paper Feed Motor | 15W |
| Paper Roll Diameter | Ø25mm |
| Foil Width | 200mm |
| Working Efficiency | 400 ~ 600 cycles/hour |
| Net Weight | Approx. 280Kg |
| Power Supply | AC220V, 50HZ |
1. Cosmetics & Personal Care Packaging: e.g., lipstick tubes, compact cases, perfume bottle caps, skincare bottle bodies/pump heads, makeup brush handles.
2. Electronics & Appliances Housings: e.g., Bluetooth earphone charging cases, speaker panels, remote control buttons/housings, small appliance control panels (e.g., coffee makers, hair dryers), USB flash drive/external hard drive casings.
3. Gifts, Crafts & Cultural Creative Products: e.g., metal bookmarks, leather notebook covers, wooden gift boxes, acrylic ornaments, writing instruments, medal plaques/certificates.
4. Toys & Models: e.g., alloy car model logos, plastic doll detail decoration, special patterns on building blocks, and game controller buttons.
5. Automotive Interiors & Components: e.g., interior plastic parts (like air vent trim, button icons), car emblems, key fobs.
6. Stationery & Office Supplies: e.g., high-end pen barrels, business card holders, folder embossing, and certificate covers.
7. Tobacco & Alcohol Packaging & Labels: e.g., liquor bottle caps, cigarette pack partial decoration, and high-end wine labels.
